All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. On new galvanized surfaces, solvent wipe to remove surface contamination, then use an etching solution or abrade the surface by sanding. On weathered surfaces, power or hand wash with detergent and rinse thoroughly. The surface must be dull and have a profile; use an etching solution if needed. Performance will be directly related to the degree of surface preparation.
|Primer:||Vers-Acryl 200 Acrylic Maintenance Primer/Finish|
|Primer/Finish:||Vers-Acryl 200 Acrylic Maintenance Primer/Finish|
|Vers-Acryl 203 Acrylic Maintenance Primer/Finish Mid-Sheen|
|Finishes:||Permacryl Exterior Acrylic Latex - Flat, Satin or Semi-Gloss|
|Weather Plate Acrylic Latex - Flat, Satin or Semi-Gloss|
|EverCryl Exterior Acrylic Latex - Flat or Satin|
|DTM-AT:||Finium DTM-AT Acrylic - Semi-Gloss or Gloss|
The products above are commonly recommended for galvanized metal. Other Diamond Vogel products, including zinc-rich primers, epoxies and polyurethanes from our Pinnacle Protective Coatings, may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.