Exterior Plywood/T-111

Exterior Plywood/T-111

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Performance will be directly related to the degree of surface preparation. Refer to Diamond Vogel Technical Bulletin on "Finishing Exterior Plywood" for further surface preparation information.

Recommended Products

Primers:Sure Grip Acrylic Latex Primer
 Weather Plate Acrylic Latex Primer
Finishes:Permacryl Exterior Acrylic Latex - Flat, Satin or Semi-Gloss
 Weather Plate Acrylic Latex - Flat, Satin or Semi-Gloss
 EverCryl Exterior Acrylic Latex - Flat or Satin
Semi-Transparent Stain:Grain Stain Semi-Transparent Stain
Semi-Solid Stain:Grain Stain Semi-Solid Stain
Solid Hide Latex Stain:Grain Stain Exterior Solid Latex Stain
Solid Hide Oil Stain:Grain Stain Exterior Solid Oil Stain

The products above are commonly recommended for plywood.  Other Diamond Vogel products may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.