Interior Brick

Interior Brick

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. New masonry and mortar must cure for minimum of 30 days at 72°F (22°C) prior to coating application. Level all surface projections and mortar spatters. Remove all soluble salts. Performance will be directly related to the degree of surface preparation.

Recommended Products

Primer:OmniPrep Universal Interior Primer
Finishes:Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss
 Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Assure Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss

The products above are commonly recommended for brick.  Other Diamond Vogel products may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.