Interior Drywall/Gypsum Board

Interior Drywall/Gypsum Board

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Fill nail holes and imperfections with spackling compound and allow to dry. Sand tape joints and spackled areas and remove dust. Glossy surfaces should be dulled by sanding. More information on surface preparation for gypsum board can be found here. Performance will be directly related to the degree of surface preparation.

Recommended Products

Surfacer:Pre-Tex Interior Primer/Surfacer
Primer:PosiPrime Interior Primer
Finishes:Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss
 Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Assure Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss

The products above are commonly recommended for drywall/gypsum board.  Other Diamond Vogel products may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.