Interior Ferrous Metal

Interior Ferrous Metal

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Consult our ferrous metal surface preparation recommendations or contact us for assistance. Performance will be directly related to the degree of surface preparation.

Recommended Products

Primers:Vers-Acryl 200 Acrylic Maintenance Primer/Finish
 Cote-All Universal Alkyd Primer
Primer/Finish:Vers-Acryl 200 Acrylic Maintenance Primer/Finish
 Vers-Acryl 203 Acrylic Maintenance Primer/Finish Mid-Sheen
Finishes:SureFlo Acrylic Latex Enamel - Satin or Gloss
 Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss
 Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss

The products above are commonly recommended for ferrous metal.  Other Diamond Vogel products, including zinc-rich primers, epoxies and polyurethanes from our Pinnacle Protective Coatings, may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.