Interior Hardboard

Interior Hardboard

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Sand smooth any exposed wood surfaces. Patch nail holes and any imperfections with wood filler or putty and sand smooth. Remove sanding dust. Performance will be directly related to the degree of surface preparation.

Recommended Products

Primer:Mill Max Interior Enamel Undercoater
Bonding Primer:Diamond Prime Universal Primer/Sealer
Finishes:SureFlo Acrylic Latex Enamel - Satin or Gloss
 Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss
 Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss

The products above are commonly recommended for hardboard.  Other Diamond Vogel products, including our Pinnacle Protective Coatings, may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.