Interior Plaster

Interior Plaster

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. New plaster must cure for a minimum of 30 days at 72°F (22°C) prior to coating application. Sand smooth and dust. Fill cracks with spackling compound, allow to dry and sand smooth. Remove sanding dust. Performance will be directly related to the degree of surface preparation.

Recommended Products

Primers:OmniPrep Universal Interior Primer
Finishes:Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss
 Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Assure Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss

The products above are commonly recommended for plaster.  Other Diamond Vogel products, including our Pinnacle Protective Coatings, may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.