All new wood surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Sand smooth. Patch nail holes and any imperfections with wood filler or putty and sand smooth. Remove sanding dust. On previously painted surfaces, be sure the surface is free of all contaminants and dull all glossy surfaces by sanding. Performance will be directly related to the degree of surface preparation.
|Primers:||Mill Max Interior Latex Enamel Undercoater|
|Finishes:||SureFlo Acrylic Latex Enamel - Satin or Gloss|
|Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss|
|Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss|
|Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss|
|Spray-Only Finish:||Super Quick 30 Interior/Exterior Latex Satin Spray Enamel|
The products above are commonly recommended for wood particle board. Other Diamond Vogel products may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.