Interior Wood - Trim and Millwork

Interior Wood - Trim and Millwork

Surface Preparation

All new wood surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Sand smooth. Patch nail holes and any imperfections with wood filler or putty and sand smooth. Remove sanding dust. On previously painted surfaces, be sure the surface is free of all contaminants and dull all glossy surfaces by sanding. Performance will be directly related to the degree of surface preparation.

Recommended Products

Primers:Mill Max Interior Latex Enamel Undercoater
Finishes:SureFlo Acrylic Latex Enamel - Satin or Gloss
 Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss
 Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss
 Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss
Spray-Only Finish:Super Quick 30 Interior/Exterior Latex Satin Spray Enamel

The products above are commonly recommended for wood trim and millwork.  Other Diamond Vogel products may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.