All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. New masonry must cure for a minimum of 30 days at 72°F (22°C) prior to coating application. Level all surface projections and mortar spatters. Remove all soluble salts. Performance will be directly related to the degree of surface preparation.
|Primer:||OmniPrep Universal Interior Primer|
|Finishes:||Permacryl Interior Latex Enamel - Flat, Eggshell, Satin or Semi-Gloss|
|Vantage Plus Interior Latex Enamel - Flat, Eggshell or Semi-Gloss|
|Assure Interior Latex Enamel - Flat, Eggshell or Semi-Gloss|
|Zero Plus 0 VOC Interior Latex - Flat, Eggshell or Semi-Gloss|
The products above are commonly recommended for concrete walls. Other Diamond Vogel products, including our Pinnacle Protective Coatings, may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.