All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. New masonry and mortar must cure for a minimum of 30 days at 72°F (22°C) prior to coating application. Level all surface projections and mortar spatters. Remove all soluble salts. Performance will be directly related to the degree of surface preparation.
|Primer:||Weather Plate Exterior Acrylic Latex Primer|
|Finishes:||Permacryl Exterior Acrylic Latex - Flat, Satin or Semi-Gloss|
|Weather Plate Acrylic Latex - Flat, Satin or Semi-Gloss|
|EverCryl Exterior Acrylic Latex - Flat or Satin|
|Elastomeric:||Permaflex Elastomeric Coating|
The products above are commonly recommended for brick. Other Diamond Vogel products may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.