All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Patch all nail holes, cracks and imperfections with exterior spackling compound. Sand and wipe clean. Woods subject to tannin bleeding should be primed with a stain blocking primer. Performance will be directly related to the degree of surface preparation.
|Primers:||Sure Grip Exterior Acrylic Latex Primer|
|Weather Plate Acrylic Latex Primer|
|Prime-O-Seal Alkyd Primer|
|Finishes:||SureFlo Acrylic Latex Enamel - Satin or Gloss|
|Permacryl Exterior Acrylic Latex - Flat, Satin or Semi-Gloss|
|Weather Plate Acrylic Latex - Flat, Satin or Semi-Gloss|
|Satinamel Interior/Exterior Alkyd Satin Enamel|
|Cote-All Multi-Purpose Alkyd Gloss Enamel|
The products above are commonly recommended for ferrous metal. Other Diamond Vogel products, including zinc-rich primers, epoxies and polyurethanes from our Pinnacle Protective Coatings, may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.