Waterborne Coatings

Aquinity

Waterborne Acrylic


Aquinity delivers outstanding protection and workability in a waterborne formula. It is a single component, waterborne acrylic

  • High Solids
  • Fast Dry and Stacking Times
  • Excellent Sandability as a Self-Seal System
  • Excellent Film Build
  • Minimal Grain Raise
  • No Critical Recoat Time
  • Excellent Chemical and Wear Resistance
  • Excellent Wood Warmth
  • Meets KCMA and ASTM Performance Requirements When Applied According to Manufacturer's Specifications

Product Information

Finish Color Product Code Product Data Safety Data
Gloss - 80+ units at 60 degrees Clear Finish DC-0519 Click Here Click Here
Semi-Gloss 55 to 60 units at 60 degrees Clear Finish DC-0516 Click Here Click Here
Medium Satin - 40 to 45 units at 60 degrees Clear Finish DC-0514 Click Here Click Here
Satin - 30 to 35 units at 60 degrees Clear Finish DC-0513 Click Here Click Here
Dull Satin - 15 to 20 units at 60 degrees Clear Finish DC-0512 Click Here Click Here
Flat - Less Than 10 units at 60 degrees Clear Finish DC-0510 Click Here Click Here
Satin - 30 to 35 units at 60 degrees Pigmented Finish - White DC-1513 Click Here Click Here
Dull Satin - 15 to 20 units at 60 degrees Pigmented Finish - White DC-1512 Click Here Click Here

Aquinity

Waterborne White Primer


Aquinity is a ready to use high solids, waterborne, white primer that provides very good hide when used on hardwood or MDF.

  • Fast Dry
  • Easy Sanding
  • Excellent Film Build with Sag Resistance
  • Good Flow and Leveling
  • No Critical Recoat Time
  • Topcoat with Waterborne, Pre-Catalyzed Lacquer, Post-Catalyzed Lacquer, Conversion Varnish, and Urethane

Product Information

Finish Color Product Code Product Data Safety Data
Primer Pigmented Primer - White DC-1501 Click Here Click Here

For More Information

Please fill out the information below if you'd like more information about our products.