Surface Preparation
All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. New concrete must cure for a minimum of 30 days at 72°F (22°C) prior to coating application. Level all surface projections and mortar spatters. Remove all soluble salts. Remove all form release agents prior to coating. Performance will be directly related to the degree of surface preparation.
Recommended Products
| Primers: | Sure Grip Interior/Exterior Acrylic Latex Primer |
| Finishes: | Palisade Ultra Premium Exterior Acrylic Latex |
| Durango Acrylic Latex Exterior Finish | |
| EverCryl Exterior Acrylic Latex Finish |
The products above are commonly recommended for concrete wall. Other Diamond Vogel products, including epoxies and polyurethanes from our High Performance Coatings, may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.