Exterior Ferrous Metal

Surface Preparation

All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Consult our ferrous metal surface preparation recommendations or contact us for assistance. Performance will be directly related to the degree of surface preparation.

Recommended Products

Primers: Vers-Acryl 300 Acrylic DTM Primer
  CoteAll Multi-Purpose Alkyd Primer

Primer/Finishes: Vers-Acryl 303 Acrylic DTM Primer/Finish

Finishes: Palisade Ultra Premium Exterior Acrylic Latex
  Durango Acrylic Latex Exterior Finish
  EverCryl Exterior Acrylic Latex Finish

DTM-AT: Finium DTM-AT Acrylic

The products above are commonly recommended for ferrous metal. Other Diamond Vogel products, including zinc-rich primers, epoxies and polyurethanes from our High Performance Coatings, may be better suited for your project.  Please contact your Diamond Vogel representative for personalized service.