Metal Fabrication
Coatings

Metal Fabrication Coating Solutions 

Coatings for fabricated parts, weldments, and OEM components. Protect against handling wear, moisture, and corrosion. Consistent finishes support throughput and reduce rework on the line.

WHY IT MATTERS | LIQUID | POWDER | PERFORMANCE | LOCAL SUPPORT | FAQs

 

Why it Matters

Fabricated parts and job-shop components face constant handling and exposure to moisture and abrasion. Diamond Vogel industrial coating systems protect against corrosion and wear, helping maintain consistent finishes and reduce downtime. From primers to topcoats, our systems deliver durability that keeps production moving.

Common Coating Stressors

  • Handling and assembly wear
  • Moisture exposure
  • Welded edges and cut surfaces
  • Abrasion during transport
  • Corrosion risk before installation
     

Talk to a Coatings Expert


Coatings That Fit Your Line

 

Liquid Systems That Fit Your Process

Liquid coatings that support application consistency, regulatory needs, and production efficiency.

 

High-solids acrylic polyurethane with tenacious adhesion and protection from a variety of chemicals.

Best for: Fabricated components headed into service with chemical or solvent exposure.

Two-component acrylic polyurethane with excellent gloss retention, hardness, mar resistance, and chemical resistance.

Best for: Fabricated parts and assemblies exposed to sunlight and splash-and-spill chemical contact.

Workhorse     

Topcoat

Fast-drying enamel that is versatile, easy to apply, and delivers a durable, high-quality finish.

Best for: Job shops running mixed parts on fast turnaround.

 

Mult-E-Prime 500       

Primer

High-build, high-solids epoxy primer for corrosion protection in harsh conditions, versatile for shop or field application..      

Best for: Heavy fabrications primed in the shop or touched up after installation.

High solids finishing enamel with strong adhesion and reliable resistance to chemicals and solvents under splash and spill conditions. Easy to apply and fast drying to keep production moving.        

Best for: Weldments and cut edges where corrosion can start before the part ever ships.

High-solids, two-component urethane primer for OEMs that need gloss holdout, adhesion, and chip resistance. Adheres to steel, aluminum, fiberglass, and galvanized steel, and can be applied wet-on-wet.    

Best for: Job shops priming steel, aluminum, and galvanized parts on the same line.

View All Liquid Technologies 


Powder Coatings Built for Lasting Protection

Peridium® powder coatings deliver consistent application quality and long-term protection across a full range of technologies.

 

Peridium® T-Series

Topcoat | Primer

Super-durable TGIC polyester with EdgeSpan™ Technology for superior edge coverage and corrosion protection. Pair with a zinc primer for increased corrosion resistance.

Best for: Fabricated parts with sharp edges, welds, and cut surfaces.

Epoxy and zinc-rich primers delivering inherent toughness, strong corrosion protection, and outstanding chemical resistance.

Best for: Components exposed to moisture and chemicals that need a corrosion-resistant base under the topcoat.

TGIC-free polyester that balances smoothness and edge coverage, with consistent performance across parts for global applications.

Best for: OEM components built to global specs that call for TGIC-free chemistry.

Polyester powders delivering consistent application and reliable exterior durability. Available in wrinkle and dead-flat finishes that help hide surface variation while maintaining outdoor performance.

Best for: Equipment that sees outdoor exposure and needs a durable, low-gloss or textured finish that holds up over time.

View All Powder Technologies 

Proven Performance Through Independent Testing

Diamond Vogel coating systems are tested to industry-standard ASTM methods in our ISO 17025 accredited laboratory.  Measurable, repeatable results you can specify with confidence.

Why Independent Testing Matters

Engineers can specify Diamond Vogel systems per ASTM B117 minimum 1,000 hours in OEM specifications. 

Quality control teams can request Certificate of Conformance documenting that your production batch met these performance standards. 

Warranty claims are reduced because coating performance is validated before field application.

Column image

Local Support That Keeps You Running

When your coating line goes down, you don't have time for regional distributor escalations or corporate call centers.

  • 95% of orders ship within 24 hours to Iowa, Nebraska, Minnesota, Wisconsin, South Dakota
  • Emergency line-down support: Direct access to technical specialists (not call center), on-site within 48 hours
  • Weekly fleet deliveries maintain steady inventory without large stock commitments
  • After-hours support: Technical team provides evening/weekend assistance during production emergencies
Column image

Frequently Asked Questions

What coatings work best for fabricated parts and weldments?

Answer: Diamond Vogel offers liquid and powder systems that protect parts from corrosion and wear through handling, transport, and service. Stratum® R/I and Mult-E-Prime™ 500 primers build the foundation; Hyperthane®, Multi-Thane®, Workhorse™, and Peridium® powder topcoats finish the job.

How do I protect welds, cut edges, and sharp corners?

Answer: Peridium® T-Series uses EdgeSpan™ Technology for superior edge coverage and corrosion protection. In liquid, Stratum® R/I Primer adds rust-inhibitive technology with enhanced adhesion and chip resistance.

Do you have coatings for job shops running mixed parts?

Answer: Yes. Workhorse™ Topcoat is a fast-drying enamel that's versatile and easy to apply. Mult-E-Prime™ 500 is versatile for shop or field application, and the Stratum® Two-Component Urethane Primer System adheres to steel, aluminum, fiberglass, and galvanized steel.

Can coatings help reduce rework on the line?

Answer: Consistent finishes and hands-on technical support help. Our team works with you on audits, oven profiling, troubleshooting, and training so you keep production moving with fewer stops and less rework.

 

Talk to a Coatings Expert

Our technical team is ready to help you choose the right coating system for your operation.
CAPTCHA